back to index

12. Attaching Coroplast Fin-mount
48. Locate coroplast fin mount. Using alcohol, clean the bottom surface of the wing that lies between the pushrods, aft of the pod. This is where the fin mount will be attached (see plan)

49. Remove paper backing from Coroplast fin-mount to expose adhesive. Carefully place the fin mount on the wing, against the rear of the pod with the middle flute centered on the wing centerline (see plan for clarification). Press fin-mount firmly into place.

Removing paper backing from fin-mount to expose adhesive Installed fin mount - pressed firmly in place

13. Assembling Fin

All text, images and other content © 2003 Richter R/C. All rights reserved.